wp20368 - Genuine Volvo D13 Air Intake Manifold - 1 - wisentpartscenter.com

Description

Volvo 21833406 Intake Manifold - Genuine Volvo D13 Air Intake Manifold with Heater

The Volvo 21833406 is a genuine air intake manifold for the D13 engine, with the intake air heater built in. It carries the charge air from the turbo across to the cylinder head and distributes it evenly to the intake ports, and the heater warms the incoming air for cold starts. Also fits the shared Mack MP8.

Fitment & Specifications:

- Volvo D13, Mack MP8

Verify fitment with us before ordering to ensure the correct part for your application.

Purpose of the Part

The manifold takes the pressurized air coming off the turbo and charge cooler and spreads it evenly to all the cylinders. The intake air heater in it warms that air on a cold start so the engine lights off easier and runs cleaner until it warms up. A cracked manifold or a bad gasket leaks boost, which costs power and can set charge air faults.

Issue Symptoms / When to Replace

Boost leaks, low power, a whistle under boost, charge air or intake temperature faults, and hard cold starting if the heater has failed. Cracks in the housing and leaking gasket surfaces are the common reasons to replace it.

Before replacing it, check the gaskets, clamps and charge air piping, since a leak there acts the same as a cracked manifold. Check the heater element and its wiring if the complaint is only hard cold starts.

Brand Information

Volvo builds this manifold for the D13 and the shared Mack MP8, with the air heater and port layout matched to the engine. A genuine unit seals properly and the integrated heater works with the engine's cold start strategy, where cheaper copies tend to leak boost or have heater problems.

Installation Notes

Clean the head and manifold mating surfaces completely and use new gaskets and seals. Check the intake air heater and its connections while it is apart. Torque the fasteners in sequence to spec so the manifold seats flat and does not leak boost, and check the connector to the heater is seated. Confirm no boost leaks under load before returning it to service.

How to Identify an OEM Part

A genuine unit has VOLVO cast into the body along with the part number label. Check the number matches your order and compare the port layout, heater location and mounting to the manifold coming off. Copies usually lack the cast Volvo marking and use a printed label only.

Why buy from Wisent Parts
  • ⏱️
    Fast shipping
    Orders before 12PM EST ship same business day.
  • 🛡️
    180-day warranty
    All parts covered from delivery date.
  • ↩️
    Easy returns
    30-day returns.
  • ✅
    Verify fitment
    Send VIN/ESN and we’ll confirm.

Shop with confidence

Warranty & Return Information
Warranty Information

Wisent Parts offers a 180-day warranty on all parts from the date of delivery. This warranty covers orders placed directly through our website. If a part fails during this period, we’re here to help - whether it’s a replacement, repair, or refund. For full details, refer to the Warranty page.

Return Information

Wisent Parts accepts returns within 30 days of delivery. All returns are subject to a restocking fee. To qualify, parts must be unused and in their original condition. For full return instructions and restocking fee details, please refer to the Returns page.