Buy Genuine Cummins Turbocharger HE451VE for ISC/ISL 8.9L - wisentpartscenter.com

Description

4352565RX is a Genuine Cummins / Holset HE451VE VGT turbocharger for select Cummins ISC and ISL 8.9L applications. This is a variable-geometry turbocharger, not a standard fixed-geometry turbo or wastegate turbo. The VGT mechanism changes turbine position to help control boost response, exhaust flow, and exhaust brake operation where equipped. Verify 4352565RX by ESN, original turbo tag, turbocharger assembly number, actuator setup, and the supersession list shown on this page. Genuine Cummins / Holset is preferred when avoiding repeat turbo failures is critical, since a second turbo replacement can mean more labor, downtime, oil/coolant cleanup, and another diagnostic cycle.

Purpose of the Part

The HE451VE turbocharger compresses intake air so the ISC / ISL 8.9L engine can maintain proper airflow and boost under load. The variable-geometry section helps the engine build boost faster at lower RPM and manage exhaust backpressure. When the turbo, actuator, or VGT mechanism fails, the engine may lose power, smoke, overboost, underboost, or go into derate.

Issue Symptoms / When to Replace

Common signs that 4352565RX may need inspection or replacement include:

- Low boost, overboost, turbo lag, or poor pull under load
- Excessive shaft play, wheel contact, or damaged compressor/turbine wheel
- Oil leaking into the compressor or exhaust side
- VGT mechanism sticking or not moving through its full range
- Exhaust brake weak or not working, if equipped
- Whistling, scraping, or abnormal turbo noise
- Check engine light, derate, or failed VGT actuator/sweep test

Possible related Cummins VGT/turbo fault examples may include 1229 for VGT position sensor data erratic, 2636 for VGT actuator communication/update rate issues, and 2387 for VGT sticking-related diagnostics. Some applications may also show boost-related OBD codes such as P0299 or P2262. These codes do not prove the turbo is bad by themselves. Check intake restrictions, boost leaks, oil supply/drain, exhaust leaks, actuator wiring, and VGT movement before replacing the turbocharger.

Brand Information

Cummins is the OEM engine manufacturer for ISC and ISL platforms, and Holset is Cummins’ turbocharger brand used on many diesel engine applications. Genuine Cummins / Holset turbochargers are preferred because the turbo, VGT mechanism, actuator setup, and calibration path must match the engine correctly. A cheaper turbo can cost more if it causes repeat boost faults, failed VGT tests, oil leaks, or another removal.

Installation Notes

Before replacing 4352565RX, confirm the ESN, original turbo tag, actuator setup, and supersession list shown on this page. Inspect the air intake, charge-air piping, exhaust manifold, oil feed line, oil drain, coolant lines if equipped, and crankcase ventilation before installing the replacement turbo. Any debris, oil restriction, blocked drain, or boost leak can damage the new unit. Prime the turbo with clean engine oil before startup, do not rev immediately after installation, and verify boost/VGT operation with the proper diagnostic tool. Refer to Cummins QuickServe for torque specs and final test procedure.

How to Identify an OEM Part

A Genuine Cummins 4352565RX HE451VE turbocharger should be verified by the Cummins / Holset tag, original packaging, turbo model marking, actuator configuration, and casting or manufacturer identification where present. Match the removed turbo to 4352565RX and to the supersession list shown on this product page. Do not rely on appearance only, because HE451VE / HE431VE-style turbos can vary by actuator, turbine housing, calibration, and service replacement path.

Why Buy 4352565RX From Wisent Parts Center?

  • 1 Year
    Warranty

  • Genuine Parts

    Authentic OEM parts

  • 30-Day Returns

    Conditions apply

Shop with confidence

Warranty & Return Information
Warranty Information

Wisent Parts offers a 1-year warranty on all parts from the date of delivery. This warranty covers orders placed directly through our website. If a part fails during this period, we’re here to help - whether it’s a replacement, repair, or refund. For full details, refer to the Warranty page.

Return Information

Wisent Parts accepts returns within 30 days of delivery. All returns are subject to a restocking fee. To qualify, parts must be unused and in their original condition. For full return instructions and restocking fee details, please refer to the Returns page.